RE: Crosscore ADICUP3029 Hex programming

Hi, 

I am having the same problem but for me even after I followed mkokaly's suggetion I made no difference.  However, In my case I previously loaded prebuild a hex file  (from https://github.com/analogdevicesinc/sensor-sw-pack) via DAPLINK and as a result, each time I drag and drop my hex file to DAPLINK  and then reboot the board I still see the prebuild code running instead of mine.  Note that my hex file is the build of and similar example but not the same.  Please help.

Best,

Patrick