I am trying to run the blinky_example for the ADICUP3029.
However, I get errors related to the system.svc
When I open it, it gives this error details:
I am sure that I have installed all the BSP, DFP, CMSIS, etc.
I tried another project from git ADuCM3029_demo_esp8266 and it does not give this kind of error.
What might be the problem?
I suspect that the project is looking for a version of the ARM CMSIS pack that isn't installed on your machine. Could you open up the properties of the "blinky demo" and then go to C/C++ General > Path and Symbols. Check to see if the version of CMSIS pack in the path name match the version of the CMSIS pack you have installed on your machine. If they aren't, go in and edit the CMSIS pack being used to match a version you have installed on your computer.
Hi Brandon, I have checked that. CMSIS is at 5.5.1 and it is the same as the one installed on CMSIS pack manager.
Any other possible suggestions?
U r probably using a newer version of cross core, try using the 2.8 as suggested. It should work.
I am on version 2.8.3 actually. The newest versions are 2.9.1 and 2.9.0 should I down grade to 2.8.0 ?
While I was using the 2.9.1 version I had the same problem as u, on the blinky example, I downgraded to 2.8.0 and then it worked. Maybe it works.