Hello, I am working on a project using the ADICUP3029. It's a new device and I am trying to run the "Blinky" example, but I'm facing an error of "conflicting variables" in "startup_ADuCM3029.c" file when I build the code.
When I open the Info to see the previous declarations this file is shown
Any help you can give me is appreciated,
It seems that some incompatibilities were introduced between ARM CMSIS pack and ADuCM302x_DFP. These incompatibilities seem to have appeared with patch 5.6.0 of the ARM CMSIS pack.
To run the Blinky example just use the previous ARM CMSIS patch, 5.5.1. This workaround should work with no more issues until the problem is properly fixed.
I had the same problem. I returned to CMSIS 5.5.1.The conflicting variables problem (e.g. at copy_table_t ) has been resolved.
If you encounter a cmsis-dap.cfg problem at embedded.start-up.tcl , check your debug config.Some setting (e.g. CMSIS DAP) must be wrong.