On your web site
There is a Video there `Lowest Power Edge Nodes: Structural Health Monitoring `
Can you give me the parts use and reference numbers. I would like to create this project.
Anyway to get the code used in the project?
This demo used the following boards:
- ADXL355 eval board: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-ADXL35X.html
- ADuCM4050 COG board: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EV-COG-AD4050.html
- ADXL362: included on the COG board
- WiSun module: unfortunately the specific board used in this demo is not currently available. A suitable replacement is available by combining the ADF7023 (or that of another transceiver) daughter cards with the following interposer board: https://wiki.analog.com/resources/eval/user-guides/ev-cog-bleintp1z. alternatively, you may be interested in our SmartMesh transceiver described in more detail here: https://wiki.analog.com/resources/eval/user-guides/ev-cog-smartmesh1z
The source code is not available o public website but can be shared over email or FTP.
are you interested in the algorithm used for Structural health monitor or the wireless protocol used?
I`m ok with the ADXL355 and ADuCM4050 COG board . I`m looking at the radio now. What is the ragne of these radios `SmartMesh transceiver` (LOS)?
The ADuCM4050 COG board has a ADXL362 onboard correct.
For the SmartMesh what could we use for a Gateway?
We are looking to monitor mining dam health. I was interested in Structural health monitoring code and the data reduction code.
I believe they also used a EV-GEAR-EXPANDER1Z to connect the ADXL correct? Do I need to use this?
I moved this thread to a different forum based on the support channels.