I am using EV-COG-405Z in the following environment, currently.
IDE：CrossCore Embedded StudioIDE version：220.127.116.11803091352DFP:AnalogDevices.ADuCM4x50_DFP.3.2.0BSP:AnalogDevices.EV-COG-AD4050LZ_BSP.3.1.0CMSIS:ARM.CMSIS.5.1.1
I copied and executed Blinky_example (EV - COG - AD 4050 LZ) from CMSIS Pack Manager.After that, the following message is displayed on the console and the program is not executed.
Open On-Chip Debugger (Analog Devices CCES 2.8.0 OpenOCD 0.9.0-g5030ad7) 0.9.0Licensed under GNU GPL v2Report bugs to <email@example.com>0Info : select transport "swd"adapter speed: 1000 kHzcortex_m reset_config sysresetreqInfo : CMSIS-DAP: SWD SupportedInfo : CMSIS-DAP: Interface Initialised (SWD)Info : CMSIS-DAP: FW Version = 1.0Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1Info : CMSIS-DAP: Interface readyInfo : clock speed 1000 kHzin procedure 'init' in procedure 'ocd_bouncer'
What are the possible causes of this problem?
Hi Takahiro have you selected the correct target processor on debug configuration?
> After that, the following message is displayed on the console and the program is not executed.
The output from OpenOCD looks to be fine. What does your Debug View look like? Have you got a GDB launch in there too? I presume that you've built and have selected to the load the Blinky program.