Post Go back to editing

Aducm jlink errror ADUCM360

Aducm360 while reflashing it shows the error check aducm jlnk id it fails ,and register string 0x40004024 not found error cames

Parents
  • Hi,

    Have you verified the JLink via JLink commander?

    Example:

    SEGGER J-Link Commander V6.98a (Compiled Mar 5 2021 17:02:18)
    DLL version V6.98a, compiled Mar 5 2021 17:01:02

    Connecting to J-Link via USB...O.K.
    Firmware: J-Link Lite-ADI Rev.1 compiled Jan 7 2013 17:58:04
    Hardware version: V1.00
    S/N: 541006197
    OEM: ADI
    VTref=3.592V


    Type "connect" to establish a target connection, '?' for help
    J-Link>connect
    Please specify device / core. <Default>: ADUCM362
    Type '?' for selection dialog
    Device>ADUCM360
    Please specify target interface:
    J) JTAG (Default)
    S) SWD
    T) cJTAG
    TIF>SWD
    Specify target interface speed [kHz]. <Default>: 4000 kHz
    Speed>
    Device "ADUCM360" selected.


    Connecting to target via SWD
    Found SW-DP with ID 0x2BA01477
    DPv0 detected
    Scanning AP map to find all available APs
    AP[1]: Stopped AP scan as end of AP map has been reached
    AP[0]: AHB-AP (IDR: 0x24770011)
    Iterating through AP map to find AHB-AP to use
    AP[0]: Core found
    AP[0]: AHB-AP ROM base: 0xE00FF000
    CPUID register: 0x412FC231. Implementer code: 0x41 (ARM)
    Found Cortex-M3 r2p1, Little endian.
    FPUnit: 6 code (BP) slots and 2 literal slots
    CoreSight components:
    ROMTbl[0] @ E00FF000
    ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB000 SCS
    ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT
    ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB
    ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM
    ROMTbl[0][4]: E0040000, CID: B105900D, PID: 003BB923 TPIU-Lite
    ROMTbl[0][5]: E0041000, CID: B105900D, PID: 003BB924 ETM-M3
    Cortex-M3 identified.
    J-Link>

    While reflashing the code, 

    The log below will be obtained( if using EVALADICUP360 and USB cable connected to User port on the board):

    Tue Jan 11, 2022 00:48:16: IAR Embedded Workbench 8.50.6 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.4\arm\bin\armproc.dll)
    Tue Jan 11, 2022 00:48:16: Download complete.
    Tue Jan 11, 2022 00:48:16: Loaded debugee: ..........\EVAL-ADICUP360-master\projects\ADuCM360_demo_blink\IAR\Release\
    Exe\ADuCM360_demo_blink.out
    Tue Jan 11, 2022 00:48:17: Target reset

Reply
  • Hi,

    Have you verified the JLink via JLink commander?

    Example:

    SEGGER J-Link Commander V6.98a (Compiled Mar 5 2021 17:02:18)
    DLL version V6.98a, compiled Mar 5 2021 17:01:02

    Connecting to J-Link via USB...O.K.
    Firmware: J-Link Lite-ADI Rev.1 compiled Jan 7 2013 17:58:04
    Hardware version: V1.00
    S/N: 541006197
    OEM: ADI
    VTref=3.592V


    Type "connect" to establish a target connection, '?' for help
    J-Link>connect
    Please specify device / core. <Default>: ADUCM362
    Type '?' for selection dialog
    Device>ADUCM360
    Please specify target interface:
    J) JTAG (Default)
    S) SWD
    T) cJTAG
    TIF>SWD
    Specify target interface speed [kHz]. <Default>: 4000 kHz
    Speed>
    Device "ADUCM360" selected.


    Connecting to target via SWD
    Found SW-DP with ID 0x2BA01477
    DPv0 detected
    Scanning AP map to find all available APs
    AP[1]: Stopped AP scan as end of AP map has been reached
    AP[0]: AHB-AP (IDR: 0x24770011)
    Iterating through AP map to find AHB-AP to use
    AP[0]: Core found
    AP[0]: AHB-AP ROM base: 0xE00FF000
    CPUID register: 0x412FC231. Implementer code: 0x41 (ARM)
    Found Cortex-M3 r2p1, Little endian.
    FPUnit: 6 code (BP) slots and 2 literal slots
    CoreSight components:
    ROMTbl[0] @ E00FF000
    ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB000 SCS
    ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT
    ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB
    ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM
    ROMTbl[0][4]: E0040000, CID: B105900D, PID: 003BB923 TPIU-Lite
    ROMTbl[0][5]: E0041000, CID: B105900D, PID: 003BB924 ETM-M3
    Cortex-M3 identified.
    J-Link>

    While reflashing the code, 

    The log below will be obtained( if using EVALADICUP360 and USB cable connected to User port on the board):

    Tue Jan 11, 2022 00:48:16: IAR Embedded Workbench 8.50.6 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.4\arm\bin\armproc.dll)
    Tue Jan 11, 2022 00:48:16: Download complete.
    Tue Jan 11, 2022 00:48:16: Loaded debugee: ..........\EVAL-ADICUP360-master\projects\ADuCM360_demo_blink\IAR\Release\
    Exe\ADuCM360_demo_blink.out
    Tue Jan 11, 2022 00:48:17: Target reset

Children
No Data