Post Go back to editing

ISSUE ABOUT ADUCM355 AIN7

Hello,

I‘ve had a problem with how to define AIN7_LFP1 as an ADC channel  input

I've found the ADIN7_LFP1 is directly connected to ADC MUX( Figure6, UG-1262), but can't find the AIN7_LFP1 address from ADCCON MUXSELregister( Table63, UG-1262). 

ADuCM355 DATASHEET Says AIN7_LFP1 this pin can be used as an ADC input,  How should I configure it to an ADC input.

Thanks!