Differential measurement using ADC Mux on ADuCM350

According to ADC FAQ, how can i perform a differential ADC measurement?

I created afe sequence with the sequence helper.

Whats wrong:

    0x000D004A,    /* Safety word: command count = 31:16, CRC = 7:0 */
    0x84007818,    /* AFE_FIFO_CFG: DATA_FIFO_SOURCE_SEL = 3, DATA_FIFO_DMA_REQ_EN = 1, DATA_FIFO_EN = 1, DATA_FIFO_THR_VAL = 0, CMD_FIFO_DMA_REQ_EN = 1, CMD_FIFO_EN = 1, CMD_FIFO_THR_VAL = 0 */
    0xA000001E,    /* AFE_ADC_CFG: GAIN_OFFS_SEL = 0, REFEXCITESW_EN = 0, MUX_SEL = 30 */
    0xA2000000,    /* AFE_SUPPLY_LPF_CFG: BYPASS_SUPPLY_LPF = 0 */
    0x86000640,    /* AFE_SW_CFG: SW_SOURCE_SEL = 0, IVS_STATE = 0, TMUX_STATE = 0, NMUX_STATE = 6, PMUX_STATE = 4, DMUX_STATE = 0 */
    0x00109A00,    /* Wait: 68.0 ms */
    0x800000B0,    /* AFE_CFG: ALDOILIMIT_EN = 0, VREFBUFILIMIT_EN = 0, VBIASBUF_EN = 0, SUPPLY_LPF_EN = 0, DFT_EN = 0, WAVEGEN_EN = 0, TEMP_CONV_EN = 0, TEMP_SENSOR_EN = 0, TIA_EN = 0, INAMP_EN = 0, BUF_EN = 0, ADC_CONV_EN = 0, ADC_EN = 1, DAC_EN = 0, REF_EN = 1, ALDO_EN = 1 */
    0x00000C80,    /* Wait: 0.2 ms */
    0x800001B0,    /* AFE_CFG: ALDOILIMIT_EN = 0, VREFBUFILIMIT_EN = 0, VBIASBUF_EN = 0, SUPPLY_LPF_EN = 0, DFT_EN = 0, WAVEGEN_EN = 0, TEMP_CONV_EN = 0, TEMP_SENSOR_EN = 0, TIA_EN = 0, INAMP_EN = 0, BUF_EN = 0, ADC_CONV_EN = 1, ADC_EN = 1, DAC_EN = 0, REF_EN = 1, ALDO_EN = 1 */
    0x00090880,    /* Wait: 37.0 ms */
    0x86010640,    /* AFE_SW_CFG: SW_SOURCE_SEL = 0, IVS_STATE = 1, TMUX_STATE = 0, NMUX_STATE = 6, PMUX_STATE = 4, DMUX_STATE = 0 */
    0x86000640,    /* AFE_SW_CFG: SW_SOURCE_SEL = 0, IVS_STATE = 0, TMUX_STATE = 0, NMUX_STATE = 6, PMUX_STATE = 4, DMUX_STATE = 0 */
    0x800000B0,    /* AFE_CFG: ALDOILIMIT_EN = 0, VREFBUFILIMIT_EN = 0, VBIASBUF_EN = 0, SUPPLY_LPF_EN = 0, DFT_EN = 0, WAVEGEN_EN = 0, TEMP_CONV_EN = 0, TEMP_SENSOR_EN = 0, TIA_EN = 0, INAMP_EN = 0, BUF_EN = 0, ADC_CONV_EN = 0, ADC_EN = 1, DAC_EN = 0, REF_EN = 1, ALDO_EN = 1 */
    0x82000002,    /* AFE_CFG: ALDOILIMIT_EN = 0, VREFBUFILIMIT_EN = 0, VBIASBUF_EN = 1, SUPPLY_LPF_EN = 0, DFT_EN = 0, WAVEGEN_EN = 0, TEMP_CONV_EN = 0, TEMP_SENSOR_EN = 0, TIA_EN = 1, INAMP_EN = 1, BUF_EN = 1, ADC_CONV_EN = 0, ADC_EN = 1, DAC_EN = 1, REF_EN = 1, ALDO_EN = 1 */