Post Go back to editing

How do I view my data results?

I am running basic example projects which lack much detail. Specifically, I am trying to use the cn0398 moisture/pH sensor project. After I debug and upload to the board, I switch my usb cable from the "debug" port to "user" but I can't find the actual results anywhere. None of the examples explain where to actually monitor your project's results.

Parents
  • To add onto what Mircea posted above you will also need a serial terminal program to view the results on.  I use Putty and Tera Term, but any program that can read a virtual COM port will be able to view the results of the demo.  Just make sure you setup the COM port to the location of the USER USB and the baud rate is configured as specified.

Reply
  • To add onto what Mircea posted above you will also need a serial terminal program to view the results on.  I use Putty and Tera Term, but any program that can read a virtual COM port will be able to view the results of the demo.  Just make sure you setup the COM port to the location of the USER USB and the baud rate is configured as specified.

Children
No Data