I use pin 3 of port 1 (P1.3) on my products and at power up, the port is in high impedance, everything is ok.
Now we received a new reel of aduc7021 and this port (pin 1.3) now emit a glitch at power_up : 2V during 17ms with a pull down of 68Kohm.
My application doesn't work now!
Do you have changed something? Is there is a solution?
disabling the pull up in GP1PAR will only disable it after code execution. at power up GP1PAR is configured with its default value i.e. pull up enabled.