Hi,I look for a PC application/tool to program ADuC7026 micro controller's flash on factory path,using JTAG.I use uVision 4 to compile/debug/flash program for ADuC7026. But for factory path is not so good application for ADuC7026 flash program.
So I look for small simple PC application to only program flash of ADuC7026, without any other functionalities. Such application should load a HEX file through USB-JTAG adapter to the flash memory of ADuC7026.
Thank in Advance
In this answer I explain the best and cheap solution that we use.
We use Keil to burn ADuC7026 and run it from Windows Command Line. µVision can be invoked from a command line to build a project, start the debugger, or download a program to Flash. See the link:
So, command itself in CMD window is like below:
C:\Keil\UV4\UV4.exe -f <Project path>\<Project name>.UVPROJ -o LogFile.txt
In this example UV4.exe is Keil 4, If you use another version of Keil, set appropriated name.
Use Windows Batch commands to prepare script and run it by simple click in Windows explorer.