I'm working with an aduc847 and the eval board.
I'm reading the signal from a load cell (from -200uV to 20020uV) and I have a problem with the data readed.
For example, with a little dead load in the cell I have this measurements:
I have a lot of variations. If I use only the stable value (for example 850 or 8501 in this case) the amount of points between the capacity and the zero is not enough for my application.
I need a 60.000 divisions estable value, so for this I need more or less 10 points/division....
How I can filter the data readed?Somebody knows any software filter to obtain a (more or less) stable value from this data?
Any help is welcome!
Thanks in advance