OP484AM/QMLR  mechanical drawings of the component that show the pin dimensions?

Q 

Where can I get a  mechanical drawings of the component that show pin
dimensions? I can not find this information in the SMD datasheet and the
package used is different from the standard commercial part.
 

 

 

A 

The case outline descriptive designator in the SMD datasheet (Section 1.2.4) in
conjunction with the Case outline letter from the SMD part number ( "D") 
identifies the package style and number of terminals. In this case, 14 terminal
Ceramic Flat pack package.
Please see attached the mechanical drawing for the 14 pin Ceramic Flatpack
package used for OP484AM/QMLR (DSCC=5962R0051701VDA .)

Attachments:
Comments
Anonymous
  • over 4 years ago

    The section 1.2.4 of the SMD datasheet (5962-00517 Rev. G) mentions as descriptive designator GDFP1-F14 or CDFP2-F14 for the outline letter "D". According to MIL-STD-1835D (4 June 2004), neither of the two designator corresponds to the package in the mechanical drawing f_14.pdf downloadable from this page.

    Could you please confirm that the package used for this device (we are buying OP484AM/QMLL, DSCC=5962L0051702VDA) is the one reported in the file f_14.pdf?

Related