Q
For this project we are looking for a specific operational amplifier that mustmeet the following requirements:
Dual Operational Amplifier
Automotive Compliant
MSOP8 Package
Min Supply voltage of 28V
Output Voltage Swing within 2V of the supply voltage
A
There is one Operational Amplifier, which fulfills all the criteria –theADA4096-2 (http://www.analog.com/ADA4096-2). It is available as automotive
recommended, MSOP8 package, can work up to a single supply voltage of 30V and
is a rail-to-rail amplifier, therefore the output swings very closely to the
rails. The automotive recommended part is either called ADA4096-2WARMZ-R7 or
ADA4096-2WARMZ-RL (The W in the number indicates the automotive recommended
part).
Additionally the ADA4096-2 features some valuable features. It is overvoltage
protected, low power and has a low offset voltage.
Kindly find a table with important specifications of the ADA4096-2
(http://www.analog.com/ADA4096-2_datasheet) below.
Part Number
Status
Automotive
Recommended
Amps
per
Package
Feedback
Type
Bandwidth
GBP (typ)
Slew
Rate
Vnoise Density
@ Min Gain RTI
(typ)
Vsupply
Span
(Max)
(V)
Vos
@ min gain
(max)
Rail-to-Rail
In
Rail-to-Rail
Out
Temp Range
Operating
Package
ADA4096-2
Recommended for New Designs
Yes
2
Voltage
786 kHz
400 mV/us
27 nV/rtHz
36
300 uV
Yes
Yes
-40 to 125°C
8 ld MSOP