Circuit made with this IC not working

Question

I have used this IC AD8436 for my application. I have connected the IC in the dual supply configuration as per given in the data sheet. Now, the problem is that I am not getting output at OUT pin in the IC 
 My inputs are: 
 Supply : +15 and -15V 
 Input signal : 200mV, 26Hz signal 
 
 What can be the possible reasons, or there is any pin to turn ON the RMS core part of the IC.

GLADION · Accepted Answer

Hi Upreti , 
 Good day. Based on the schematic you shared, it seems you have followed the part's typical application and I don't see any issue on that. If it is possible, can you share the waveforms? To check if the RMS core is working, you can use the test circuit from the datasheet: 
 Also, here is an application circuit as a reference for using the AD8436. Thank you. 
 Regards, Gilbeys)

SLA Status	Assignee	Support Status
SLA Closed. Met after 34 hours	krisf jeobico	Open

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

SLA Information

Products Mentioned

Thread Details

Circuit made with this IC not working

Thread Summary

Before You Switch