Comparator to driver 50ohm load

Hi,

Could you please suggest me a comparator which can driver the 50ohm load. Currently we have used ADCMP600 in our design.

For any clarification feel free to ask me.

Regards

Anand M

Parents
  • Hi Anand M,

    Again, my apologies for the delayed response. ADCMP600 is designed to drive CMO/TTL loads, i.e. high impedance load. Something like the ADCMP606 would be more suitable as it is designed to drive 50-ohm loads that are terminated to VCCO, i.e. CML logic. The ADCMP606 can also be used in a ground referenced  CML configuration which is shown in the datasheet and may be of use to you.

     

     

    Thanks,

    Roel

Reply
  • Hi Anand M,

    Again, my apologies for the delayed response. ADCMP600 is designed to drive CMO/TTL loads, i.e. high impedance load. Something like the ADCMP606 would be more suitable as it is designed to drive 50-ohm loads that are terminated to VCCO, i.e. CML logic. The ADCMP606 can also be used in a ground referenced  CML configuration which is shown in the datasheet and may be of use to you.

     

     

    Thanks,

    Roel

Children
No Data