ADR06 capacitive load

Question

Hello 
 One of my customer is considering ADR06. 
 The capacitive load would be 4uF. Can ADR06 drive it? 
 Should they use buffer amplifier? 
 If you have advice, it is helpful. 
 Regards, 
 Shumpei

Emman.A · Accepted Answer

Hi Shumpei, 
 Yes, that should be fine. It is actually recommended on its datasheet to put an additional 1 uF to 10 uF electrolytic, tantalum or ceramic capacitor at the output to improve transient performance response to sudden changes in load current. 
 Let me know if you need anything else. 
 Best regards, 
 Emman