ADL5206 Low Frequency Operation

Question

Hi, 
 In the product selection table, minimum operation frequency for ADL5206 is 0. However, in the datasheet, data available is at 10 MHz minimum. Can this amplifier be used at lower frequencies (down to 100 kHz or even more below)? Does performance degrade at those lower frequencies? Is an extra measure required with the circuit in the case of usage?

rachana.kaza@analog.com · Accepted Answer

HI, 
 Yes ADL5206 can operate under 10MHz. 
 It is not a part limitation but due to hardware limitations of the EVB, instrument, rack etc. they had data taken at 10MHZ minimum. 
 The part can function below 10MHz. 
 Hope this helps. 
 Warm Regards, 
 Rachana)

Electronic Design Services - PartnerZone

Products Mentioned

ADL5206 Low Frequency Operation