ADA4960 low frequency (100kHz

Question

I'm considering the ADA4960-1 for an ADC driver application that requires requires a fairly low frequency AC coupling (30kHz) and a maximum signal frequency of 200MHz. The datasheet of the ADA4960-1 does not have any data for frequencies less than 10MHz. What performance (distortion, noise) can I expect in the 30kHz - 10MHz range if input and output are capacitively coupled?

ADIApproved · Accepted Answer

Hi Arnold, 
 We don't have data below 10 MHz, but the HD should performance be similar, if not better at lower frequencies, and the noise density should also remain constant. Any 1/f noise contribution should be insignificant. 
 Best regards. 
 --Jonathan)

Partner Forums

Partner Libraries

Products Mentioned

ADA4960 low frequency (100kHz<f<10MHz)