I have a bunch of OP97 op amps that I'm trying to simulate in LTSPICE- so I have a few questions:
1) Why is this not found in the LT SPICE library? Or anywhere else ?
2) Can I use the OP07 as a simulation model instead?
3) When using an existing spice model such as OP07, I can't see anything inside the model, like what parameters it is simulating with. Is that intended? I know for example, I can look at parameters like beta, etc, for a transistor and even change it, sweep it, whatever.
Thank you in advance
Hi jweaver: You can't see the various specs. But you can test them in circuit, the same ways you might do it on the bench (or even more easily in spice ).
For the OP97, I would use an LT1097. For the OP07, I would use an LT1001.
I am an opamp expert but not a spice expert, so I am not clicking "Suggest as Answer".
Thanks Glen
The OP297 is the dual version of the OP97 so the OP297.cir model should work. I think the only difference might be that the dual version does not pinout the external compensation pin. If you are using that feature of the OP97 you might have difficulty the OP297 model. I have not checked it that closely.
Doug.