When thinking about WIFI / wired Ethernet with the adalm-pluto, you see in the pluto's internal webpage :-
The link given https://wiki.analog.com/university/tools/pluto/common/customizing gives Page not found.
Where can I find out how to set these up so I can access a remote pluto via wifi or ethernet?
Peter - G4DCP
Please ignore the first reference to https://wiki.analog.com/university/tools/pluto/common/customizing I don't see how to edit my question and I inserted it once too often!
OK folks worked it out myself.
Plug the adalm-pluto into your normal machine and edit the file config.txt using a normal raw text editor (such as wordpad or TextPad) Do Not use Windows notepad :-
Edit the config file carefully to set addresse and ssid.
Eject the disk.
Power the ADALM-PLUTO from a suitable 5v source and using an on-the-go cable connect the wireless stick to the pluto.
If you have a compatible wifi stick the device will become accessible on the LAN at the address that you specified.
Test with SSH.
This is not working for me. i had assigned ip address but won't see internet access or not able to ping the address.
Any help would ne appreciated.