*** happens! I unplugged the usb-connection while pluto was updating firmware (LED1 flashed fast)! Now no usb-connection is available. Is there a way to reset the pluto?
Yes it happens ... Try DFU update -
73 es mni 55 de dl6seg
It works now again!
BTW: If I plugin a Ethernet-Connector I get all as output of nmap:
Starting Nmap 7.80 ( https://nmap.org ) at 2021-04-30 00:35 Mitteleuropäische Sommerzeit
Nmap scan report for pluto.local (192.168.1.113)
Host is up (0.0010s latency).
All 100 scanned ports on pluto.local (192.168.1.113) are filtered
MAC Address: 00:E0:4C:69:BF:F3 (Realtek Semiconductor)
73 es TNX!!! Andreas HB9HCI
Works for me -
Starting Nmap 7.80 ( https://nmap.org ) at 2021-04-30 08:18 CEST Nmap scan report for pluto.local (10.44.3.53) Host is up (0.0020s latency). Not shown: 998 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http Nmap done: 1 IP address (1 host up) scanned in 0.22 seconds
usb 1-1: new high-speed USB device number 2 using ci_hdrc usb 1-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 usb 1-1: Product: USB 10/100/1000 LAN usb 1-1: Manufacturer: Realtek usb 1-1: SerialNumber: 000000 usb 1-1: reset high-speed USB device number 2 using ci_hdrc r8152 1-1:1.0 eth0: v1.10.10
I was using an USB ethernet adapter plugged into the OTG port...