I want to use ADALM-PLUTO for getting GHz frequency at the SMA TX output .
I am not finding any such tutorials.
can anyone suggest please.
We recommend using Pluto in a development framework like MATLAB or GNU Radio.
Here is also some general intro material on Pluto (See bottom Slides and Labs): https://wiki.analog.com/grcon2018
Please see this example of Spectral Analysis with ADALM-PLUTO and Matlab: https://www.mathworks.com/examples/communications/mw/plutoradio_product-plutoradioSpectralAnalysisExample-spectral-analysis-with-adalm-pluto-radio
Just open the 'ADALM-PLUTO' Receiver block (double-click) to configure the frequency parameter.
Other examples can be found here:
I tried with your suggestion from www.mathworks.com/.../plutoradio_product-plutoradioSpectralAnalysisExample-spectral-analysis-with-adalm-pluto-radio
I am able to get the waveform displayed.
but I don't see any signal at the SMA output(TX) of pluto.
how can I get the frequency output at the SMA connector?
In the second link that I sent, you can find examples that contain the Pluto Transmitter block:
By clicking the "Open the companion plutoradiofreqcalib Tx model" link you can get to an example of generating a sine wave
The output data can be seen using the receiver block example via loopback connection.
Please let me know if you need further assistance.
This looks more like a Mathworks related issue rather then a Pluto issue:
I have been waiting for the simulink licence to be free. we have 0nly 4 licences and all of them show busy, so I am not able to use matlab-simulink yet. meanwhile I am also trying to get a new licence if the fund permits.
Can you please guide me for using IIOSCOPE for interfacing with PLUTO fore the generation of high frequency? If that is possible, I need not wait endlessly for simulink.
thanks and regards
any idea about IIOSCOPE for using with PLUTO.
meanwhile I was trying to purchase matlab-simulink.
what are the tool boxes required to be purchased with matlab and simulink to work with pluto?
thanks and regards
Information about how to use IIO Oscilloscope wit Pluto can be found at the following links:
For applications with Matlab and Pluto you will need the Communication Toolbox Support Package:
All the information you need to get started can be found here:
A guide on how to install the package: