I want to use ADALM-PLUTO for getting GHz frequency at the SMA TX output .
I am not finding any such tutorials.
can anyone suggest please.
We recommend using Pluto in a development framework like MATLAB or GNU Radio.
Here is also some general intro material on Pluto (See bottom Slides and Labs): https://wiki.analog.com/grcon2018
Please start reading here:
you can use OSC with the fmcomms2 plugin:
Simply set TX LO to the desired frequency and use FPGA settings DDS: One CW Tone.
Please see this example of Spectral Analysis with ADALM-PLUTO and Matlab: https://www.mathworks.com/examples/communications/mw/plutoradio_product-plutoradioSpectralAnalysisExample-spectral-analysis-with-adalm-pluto-radio
Just open the 'ADALM-PLUTO' Receiver block (double-click) to configure the frequency parameter.
Other examples can be found here:
I tried with your suggestion from www.mathworks.com/.../plutoradio_product-plutoradioSpectralAnalysisExample-spectral-analysis-with-adalm-pluto-radio
I am able to get the waveform displayed.
but I don't see any signal at the SMA output(TX) of pluto.
how can I get the frequency output at the SMA connector?
In the second link that I sent, you can find examples that contain the Pluto Transmitter block:
By clicking the "Open the companion plutoradiofreqcalib Tx model" link you can get to an example of generating a sine wave
The output data can be seen using the receiver block example via loopback connection.
Please let me know if you need further assistance.