Pluto not detected on Raspberry pi zero wh

Hi Alvarojmoreno10 ,
Could you confirm that the otg USB port is working by plugging something more low-power? (mouse, keyboard)

If it works, try to also connect the second micro USB power port from the Pluto to a separate power supply


Dumitru

Yes, that does work. But when I connect the pluto sdr it doesn't detect anything. I also connect the second micro USB power port from the Pluto. But, even so, when I enter the command 'lsusb' it does not detect pluto. The command 'dmesg | grep usb' shows this
alvaro12@raspberrypi:~ $ dmesg | grep usb
[    0.207473] usbcore: registered new interface driver usbfs
[    0.207574] usbcore: registered new interface driver hub
[    0.207685] usbcore: registered new device driver usb
[    4.618136] usbcore: registered new interface driver smsc95xx
[    5.952574] dwc_otg 20980000.usb: DWC OTG Controller
[    5.952762] dwc_otg 20980000.usb: new USB bus registered, assigned
bus number 1
[    5.952859] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[    5.953470] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 6.06
[    5.953512] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    5.953539] usb usb1: Product: DWC OTG Controller
[    5.953559] usb usb1: Manufacturer: Linux 6.6.51+rpt-rpi-v6
dwc_otg_hcd
[    5.953579] usb usb1: SerialNumber: 20980000.usb
[    5.956885] usbcore: registered new interface driver usb-storage
[    5.964525] usbcore: registered new interface driver usbhid
[    5.964549] usbhid: USB HID core driver
[   57.204396] usbcore: registered new interface driver brcmfmac

alvaro12@raspberrypi:~ $ dmesg | grep USB
[    5.952762] dwc_otg 20980000.usb: new USB bus registered, assigned
bus number 1
[    5.953470] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 6.06
[    5.953512] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    5.954915] hub 1-0:1.0: USB hub found
[    5.964549] usbhid: USB HID core driver

Assuming that you have tested the Pluto on a different PC and it worked, could you tell me the specifications of the power supply that you are using for the Pi zero?

Dumitru

It already works correctly. There wass OTG conector  problem. Thank you!

It already works correctly. There wass OTG conector  problem. Thank you!