Written By: Andreea Pop and Antoniu Miclaus and Doug Mercer
Objective
The objective of this activity is to build a simple tilt sensor using the ADXL327 and observe how the output voltage varies with…
Written By: Doug Mercer and Antoniu Miclaus
Objective
The objective of this lab activity is to explore the use of the light emitting diode (LED) as a photodiode light sensor and the use of NPN and…
Written By: Doug Mercer and Antoniu Miclaus
Objective
The objective of this lab activity is to learn how to use a chain of amplifiers for gain and filtering, in a practical example that aims to recover…
Written By: Antoniu Miclaus and Andreea Pop
Objective
The objective of this lab activity is to measure ambient temperature using integrated circuit temperature transducers that provide an output (current…
Written By: Andreea Pop and Antoniu Miclaus
Objective
The objective of this activity is to use the principles of magnetic field generation and detection to build a simple proximity detector and observe…
Written By: Antoniu Miclaus and Doug Mercer
Objective
In this activity, you will construct an optocoupler from an infrared LED and an NPN phototransistor. You will investigate the operation of an optocoupler…
Written By: Doug Mercer and Antoniu Miclaus
Objective:
The objective of this lab activity is to design a differential temperature sensor circuit using diodes.
Background:
A diode’s forward voltage…
Measuring Seismic waves with ADALM1000 and a Geophone
Commercial systems used for seismic exploration usually require expensive analog instrumentation. In this Blog entry, a low cost vertical geophone…
More real world power measurements
In a previous Blog entry we looked at the current transformer. As some more real world examples let's use the model LCTC-0250 clamp-on current sensor and the M1k to…
More real world power measurements
In a previous Blog entry we looked at the current transformer. As some more real world examples let's use the model LCTC-0250 clamp-on current sensor and the M1k to…