Written By: Doug Mercer and Antoniu Miclaus
Objective
The objective of this activity is to investigate the output stages (class B and AB) of a simple push-pull amplifier.
Background
The role of…
Written By: Andreea Pop and Antoniu Miclaus
Objective
The objective of this lab activity is to design and build an audio amplifier that takes the small output voltage from an electret microphone and…
Written By: Antoniu Miclaus and Doug Mercer
Objective
The goal of this activity is to explore a high gain inverting amplifier constructed from complementary MOS devices (CMOS).
Materials
ADALM2000…
Written By: Doug Mercer and Antoniu Miclaus
Objective:
The purpose of this activity is to investigate the common emitter configuration of the bipolar junction transistor (BJT).
Background
The common…
Written By: Doug Mercer and Antoniu Miclaus
Objective:
The objective of this activity is to investigate the frequency response of the common emitter amplifier configuration using an NPN BJT transistor…
Written By: Doug Mercer and Antoniu Miclaus
Objective
By combining the circuit blocks already explored in previous StudentZone articles , this activity helps build a complete high open-loop gain amplifier…
Written By: Doug Mercer and Antoniu Miclaus
Objective:
The purpose of this activity is to investigate the common source configuration of a MOS transistor.
Background
The common source amplifier…
Written By: Doug Mercer and Antoniu Miclaus
Objective:
In this lab, we introduce the operational amplifier (op amp) in switch-mode configuration needed to obtain an op amp voltage comparator’s behavior…
Written By: Doug Mercer and Antoniu Miclaus
Objective:
The settling time of an amplifier, or any signal chain for that matter, is defined as the time it takes the output to respond to a step change…
Written By: Doug Mercer and Antoniu Miclaus
Objective
The objective of this lab activity is to investigate simple transresistance amplifier input stage configurations.
Background
A transresistance…