Hi,
As per Stingray board configuration , there are two switches( CSB ) to select the ADAR 1000 Chip configuration.
Since the switches are manually controlled. Is there any way to control them through programming.
Also what is the max clock rate of SPI in stingray board
The maximum SPI rate for the Stingray board is 25MHz, we are using a SPI clk rate of no less than 10MHz. Please see page 9 of the ADAR1000 data sheet here: https://www.analog.com/media/en/technical-documentation…
Hi,
By connecting the CSB 3 and CSB 4 of one stingray board with the other, can I control all the parameters of 2 stingray boards.
Also is there any ICD available explaining type of signals and their voltage…
Hi,
Yes that is correct. you can connect CSB3 and CSB4 of one stingray board with another and can use that to control both boards.
We do not have an ICD available at this time, however I would recommend…
