Post Go back to editing

AD9213 no system and board view

I am using an ad9213 eval board and have installed ace(1.24.3095.1398) and plug-in for it on a window machine. The ace software can detect the eval board but after I double clicked the icon, the system view is empty. I double clicked on the AD9213-10GBEZ plug in but still empty system view, but as I double clicked on other board the system view showed up. Does anyone know how to get it to work for the AD9213?

Parents
  • Hi ethanne,

    I ran into the same problem on my bench! It turns out that the ACE core software and the AD9213 plugin are trying to do the same task and it is causing a conflict.

    There is a manual workaround that is not too cumbersome. I've attached a description of the workaround. I believe this will resolve the issue.

    I'm very sorry for the trouble. I know you should not have to do this, but this is the work around for now. It is supposed to be resolved in the next version of ACE.

    Again, I apologize. Thank you.

    Doug

    PDF

Reply
  • Hi ethanne,

    I ran into the same problem on my bench! It turns out that the ACE core software and the AD9213 plugin are trying to do the same task and it is causing a conflict.

    There is a manual workaround that is not too cumbersome. I've attached a description of the workaround. I believe this will resolve the issue.

    I'm very sorry for the trouble. I know you should not have to do this, but this is the work around for now. It is supposed to be resolved in the next version of ACE.

    Again, I apologize. Thank you.

    Doug

    PDF

Children