Hardware setup for A2B with Raspberry PI

Hi CJB 

We have connected with you directly.

Hello,

I would also be interested in the details of this daughter board as I'm trying to use the AD2428 Mini with a raspberry pi.

Hello Mathias,

is there a manual on how to generate Code the A2B-configuration and do a implementation for the RaspberryPi and maybe other microcontrollers. Maybe a generic tutorial for one with a A2B-master-Node with two slave-Node with a third party microcontroller or the Raspberry-Pi?

I'm very interested in A2B since a while, but found it very difficult to get information on how to start with the topic, to the point where I gave up and it analog.

Thanks a lot, Best regards, Seppeltronics

The functionality is quite straightforward. it simply performs a direct pin-to-pin mapping between the A2B Board and the Raspberry Pi board. 

Hi seppeltronicsnt 

Sharing a complete tutorial from the Analog Devices Wiki to help you get started with A2B and its configuration using SigmaStudio+.

https://wiki.analog.com/resources/tools-software/a2bv2/a2bssplusstackuserguide

Thanks

Arun

Hi,

I am also interested in the details of this daughter board for a new project with raspberry pi. Is there a board or a schematic available to copy the used setup here?

Thanks.